Welcome to visit us at:

2016 show

The 119th China Import&Export Fair ( the canton fair)

Booth NO: 8.0U09

Apri. 15th~19th. 2016

Language:
  • AUJET-S AUJS Series Automatic Booster System	The AUJET-S AUJS automatic booster system consists of a JET water pump, an airtight pressure switch, a&nb
    AUJET-S AUJS Series Automatic Booster System

    AUJET-S AUJS Series Automatic Booster System The automatic booster systems consist of a JET water pump, peripheral pump, Centrifugal pump, a pressure tank, an airtight pressure switch, a pressure gauge and a connecting flexible pipe. Make the pump automatic more convenient to use. The pressure tank, equipped with a non-toxic rubber membrane, has been pre-filled with air pressure of approx0.12MPa before leaving the factory. These systems give suitable mains water pressure as required by modern domestic applications and industrial applications, and will ensure enough water to supply all user outlets. Most of the pumps included in our range of products can actually be used to form automatic booster systems.  Curve graph drawing total dynamichead of AUTO series Automatic pumps   Technical data of  AUJET-S AUJS AUQB series automatic booster system The normal power standard is 220v 50Hz single phase.Three phase 220v/380v/50Hz,Single phase 230v,240v,127v,110v,115v/60Hz models are available on request. WORKING PRINCIPLE The systems are AUTOMATIC PRESSURIZATION UNITS utilizing on pumps. such as JS, JET-S, JET-L,DP, QB... They are supplied completely with a tank,a pressure switch and a pressure gauge (or electronic switch). These pumping systems can provide sufficient water pressure for modem domestic appliances to ensure sufficient water supply.

    Detail

    Contact Us

  • 	JPRSSeriesAuto-boostingPump


	CONSTRUCT


	MotorHousing:stainlesssteel304#


	Pumpbody:Brass


	Impeller:Brass


	Pumpshaft:stainlesssteel201#


	Mechanicalseal:Blacklead
    JPRS Series Auto-boosting Pump

    JPRS Series Auto-boosting Pump CONSTRUCT Motor Housing: stainless steel 304# Pump body: Brass Impeller: Brass Pump shaft: stainless steel 201# Mechanical seal: Blacklead

    Detail

    Contact Us

  • 	AUTOJET-S/AUTOJSSeriesAutomaticBoosterSystem


	TheautomaticboostersystemsconsistofaJETwaterpump,peripheralpump,Centrifugalpump,apressuretank,anairtightpressureswitch,apressuregaugeandaconnectingflexiblepipe.Makethepumpautomaticmoreconvenien
    AUTOJET-S/AUTOJS Series Automatic Booster System

    AUTOJET-S/AUTOJS Series Automatic Booster System The automatic booster systems consist of a JET water pump, peripheral pump, Centrifugal pump, a pressure tank, an airtight pressure switch, a pressure gauge and a connecting flexible pipe. Make the pump automatic more convenient to use. The pressure tank, equipped with a non-toxic rubber membrane, has been pre-filled with air pressure of approx0.12MPa before leaving the factory. These systems give suitable mains water pressure as required by modern domestic applications and industrial applications, and will ensure enough water to supply all user outlets. Most of the pumps included in our range of products can actually be used to form automatic booster systems. Accessory Tank:24L Flexible House: 1''x1'' Pressure Switch: SK-6 Pressure Gauge: 7Bar(100PSI) Brass Connector: 3Way Cable:1.5Meters Operating Conditions Liquid temperature up to 60℃ Ambient temperature up to 40℃

    Detail

    Contact Us

  • 	AUTOJSW/IDW/JET-M SeriesautomaticBoosterSystem


	TheautomaticboostersystemsconsistofaJETwaterpump,peripheralpump,Centrifugalpump,apressuretank,anairtightpressureswitch,apressuregaugeandaconnectingflexiblepipe.Makethepumpautomaticmoreco
    AUTOJSW/IDW/JET-M Series automatic Booster System

    AUTOJSW/IDW/JET-M  Series automatic Booster System The automatic booster systems consist of a JET water pump, peripheral pump, Centrifugal pump, a pressure tank, an airtight pressure switch, a pressure gauge and a connecting flexible pipe. Make the pump automatic more convenient to use. The pressure tank, equipped with a non-toxic rubber membrane, has been pre-filled with air pressure of approx0.12MPa before leaving the factory. These systems give suitable mains water pressure as required by modern domestic applications and industrial applications, and will ensure enough water to supply all user outlets. Most of the pumps included in our range of products can actually be used to form automatic booster systems. Accessory Tank:24L Flexible House: 1''x1'' Pressure Switch:SK-6/PS-9 Pressure Gauge: 7Bar(100PSI) Brass Connector: 3Way Cable:1.5Meters Operating Conditions Liquid temperature up to 60℃ Ambient temperature up to 40℃

    Detail

    Contact Us

  • 	AUTOJET-L/AUTOJET-B SeriesautomaticBoosterSystem


	TheautomaticboostersystemsconsistofaJETwaterpump,peripheralpump,Centrifugalpump,apressuretank,anairtightpressureswitch,apressuregaugeandaconnectingflexiblepipe.Makethepumpautomaticmore
    AUTOJET-L/AUTOJET-B Series automatic Booster System

    AUTOJET-L/AUTOJET-B  Series automatic Booster System The automatic booster systems consist of a JET water pump, peripheral pump, Centrifugal pump, a pressure tank, an airtight pressure switch, a pressure gauge and a connecting flexible pipe. Make the pump automatic more convenient to use. The pressure tank, equipped with a non-toxic rubber membrane, has been pre-filled with air pressure of approx0.12MPa before leaving the factory. These systems give suitable mains water pressure as required by modern domestic applications and industrial applications, and will ensure enough water to supply all user outlets. Most of the pumps included in our range of products can actually be used to form automatic booster systems. Accessory Tank:24L Flexible House: 1''x1'' Pressure Switch: PS-9 Pressure Gauge: 7Bar(100PSI) Brass Connector: 3Way Cable:1.5Meters Operating Conditions Liquid temperature up to 60℃ Ambient temperature up to 40℃

    Detail

    Contact Us

  • 	AUTOMH/AUTOQBSeriesautomaticBoosterSystem


	TheautomaticboostersystemsconsistofaJETwaterpump,peripheralpump,Centrifugalpump,apressuretank,anairtightpressureswitch,apressuregaugeandaconnectingflexiblepipe.Makethepumpautomaticmoreconvenientto
    AUTOMH/AUTOQB Series automatic Booster System

    AUTOMH/AUTOQB Series automatic Booster System The automatic booster systems consist of a JET water pump, peripheral pump, Centrifugal pump, a pressure tank, an airtight pressure switch, a pressure gauge and a connecting flexible pipe. Make the pump automatic more convenient to use. The pressure tank, equipped with a non-toxic rubber membrane, has been pre-filled with air pressure of approx0.12MPa before leaving the factory.  These systems give suitable mains water pressure as required by modern domestic applications and industrial applications, and will ensure enough water to supply all user outlets. Most of the pumps included in our range of products can actually be used to form automatic booster systems. Accessory Tank:24L Flexible House: 1''x1'' Pressure Switch: SK-6 Pressure Gauge: 7Bar(100PSI) Brass Connector: 5Way Cable:1.5Meters Operating Conditions Liquid temperature up to 60℃ Ambient temperature up to 40℃

    Detail

    Contact Us

Previous Page [ Page of 2 ] Next Page